Skip to content

MMA vs MIG vs TIG Welding: What’s the Difference?

Welder in a helmet welding a steel gate in a metal workshop with sparks flying
Stick (MMA) welding is simple and works outdoors; MIG is fast and easy to learn; TIG gives the cleanest welds. Here is how to pick the right process and machine.

Short answer: MMA (stick) uses a coated electrode rod. It is simple, cheap and works well outdoors, which is ideal for gates, fences and repairs. MIG/MAG feeds a wire automatically with shielding gas; it is fast and easy to learn. Flux-core (FCAW) is MIG-style welding without a gas bottle. TIG gives the cleanest, most precise welds, but needs more skill.

Comparison

TIG welding a stainless steel tube with a clean weld bead
TIG gives the cleanest, most precise welds, ideal for stainless and thin metal.
MMA (stick) MIG / MAG Flux-core (FCAW) TIG
Consumable Electrode rods Wire + gas bottle Flux-cored wire, no gas Tungsten electrode + filler rod + gas
Ease of learning Medium Easiest Easy Hardest
Outdoors / wind Very good Poor (wind blows the gas away) Good Poor
Speed Medium Fast Fast Slow
Weld appearance Needs slag chipping Clean Some spatter and slag Cleanest
Typical use Gates, structures, repairs Workshops, fabrication, car bodies Outdoor and light fabrication Precision and thin metals

Why are they called "inverter" welders?

Modern welding machines use inverter electronics instead of a heavy transformer. That makes them much lighter, more efficient and easier to control, with a smoother, more stable arc. All the machines below are inverter types.

Which machine should you buy?

Three inverter welding machines on a workshop bench: MMA, MMA/TIG and multi-process MIG
From compact MMA to multi-process MIG/MMA/TIG: pick the process you need.

Starting out or doing repairs at home: an inverter MMA welder is affordable and versatile.

Want MIG-style welding without a gas bottle? A flux-core machine is a great middle ground.

Want more than one process? Combination machines let you switch between MMA and TIG, or MIG, MMA and TIG in one unit.

Industrial three-phase supply? See the Inverter MMA Welding Machine 380-400V - TOTAL.

See all machines in Welding Machines.

Safety essentials

  • A proper welding helmet or mask is essential. Never look at the arc with bare eyes.
  • Wear leather gloves, long sleeves and safety boots, and keep flammable materials away.
  • Weld in a ventilated area.

Get protective gear in Personal Protective Equipment.

Frequently asked questions

Which welding type is easiest for beginners?

MIG or flux-core welding is usually the easiest to learn because the machine feeds the wire for you. MMA is also a good starting point and is very forgiving outdoors.

Can I weld outdoors with MIG?

Wind blows away the shielding gas, causing poor welds. Outdoors, MMA (stick) or flux-core welding works better.

What does "TIG Lift" mean?

Lift TIG starts the arc by touching the tungsten to the work and lifting it, a simple, affordable way to get TIG welding on a multi-process machine.

Back to blog